logo-polimi
Loading...
Manifesto
Struttura Corso di Studi
Cerca/Visualizza Manifesto
Regolamento didattico
Indicatori corsi di studio
Internazionalizzazione
Orario Personalizzato
Il tuo orario personalizzato è disabilitato
Abilita
Ricerche
Cerca Docenti
Attività docente
Cerca Insegnamenti
Cerca insegnamenti degli Ordinamenti precedenti al D.M.509
Erogati in lingua Inglese
Le informazioni sulla didattica, sulla ricerca e sui compiti istituzionali riportate in questa pagina sono certificate dall'Ateneo; ulteriori informazioni, redatte a cura del docente, sono disponibili sulla pagina web personale e nel curriculum vitae indicati nella scheda.
Informazioni
DocenteD'Antino Tommaso
QualificaProfessore associato a tempo pieno
Dipartimento d'afferenzaDipartimento di Architettura, Ingegneria delle Costruzioni e Ambiente Costruito
Settore Scientifico DisciplinareCEAR-07/A - Tecnica Delle Costruzioni
Curriculum VitaeScarica il CV (356.22Kb - 02/02/2018)
OrcIDhttps://orcid.org/0000-0001-7397-1447

Contatti
Orario di ricevimentoOrario di ricevimento non ancora disponibile
E-mailtommaso.dantino@polimi.it
Pagina web redatta a cura del docente---

Fonte dati: RE.PUBLIC@POLIMI - Research Publications at Politecnico di Milano

Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2025 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributi su volumi (Capitolo o Saggio)
Strengthening of Existing Timber Beams with NSM CFRP Plates (Mostra >>)
Articoli su riviste
Effectiveness of timber beam strengthening with the near-surface-mounted technique (Mostra >>)
Flexural performance of RC beams strengthened with HB CFRP plates: Experimental study and theoretical model based on the intermediate crack debonding (Mostra >>)
Influence of multiple debonding defects on the behaviour of mechanically anchored CFRP-to-steel joints (Mostra >>)
Shear Strengthening of RC Beams with U-Wrapped FRCM Composites: State of the Art and Assessment of Available Analytical Models (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2024 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributi su volumi (Capitolo o Saggio)
Analytical Description of the Bond Behavior of Thermally Preconditioned Carbon FRCM Applied onto Masonry Substrates (Mostra >>)
Analytical study of FRP debonding in a real-scale concrete strengthened beam (Mostra >>)
Effectiveness of FRP bar anchors for prestressed concrete members (Mostra >>)
Experimental and numerical bond behavior of PBO FRCM tested using a pull-out set-up (Mostra >>)
Experimental and theoretical study on flexural behavior of hybrid bonded CFRP RC beams (Mostra >>)
Open issues on the use of carbon composite tendons as prestressed reinforcement of concrete members (Mostra >>)
Preliminary results of three-point bending tests of concrete notched beams with different content of PVA fibers (Mostra >>)
Quasi-Static and Fatigue Behavior of GFRP Bars Embedded in Concrete: A Comparison Between Pull-Out Tests and Flexural Tests of Slabs (Mostra >>)
Shear strengthening of RC beams with U-wrapped FRCM composites: assessment of current design guidelines (Mostra >>)
Tensile Behavior of Epoxy-Impregnated Carbon FRCM Exposed to High Temperatures (Mostra >>)
Contributo in Atti di convegno
Application of a Toughened Epoxy Adhesive for the Fatigue Strengthening of Steel Structures (Mostra >>)
Externally Bonded CFRP Reinforcement of Steel Structures: Mechanical Characterization of a Toughened Epoxy Adhesive (Mostra >>)
Repair and strengthening of existing structures using FRP composites externally-bonded with toughened epoxy adhesives (Mostra >>)
Articoli su riviste
Concrete, stirrup, and FRCM contributions to the shear strength of RC beams (Mostra >>)
Digital image correlation and cracked hinge model applied to notched beams reinforced with GFRP bars (Mostra >>)
Effect of adhesive ductility on the bond behavior of CFRP-steel cohesive interfaces made with toughened epoxy resin (Mostra >>)
FRP Strips Externally Bonded to Quasi-Brittle Substrates: Discussions and Advances of Open Research Topics (Mostra >>)
Fatigue and post-fatigue behavior of FRCM-concrete specimens under direct shear and bending conditions (Mostra >>)
Simplified Procedure to Determine the Cohesive Material Law of Fiber-Reinforced Cementitious Matrix (FRCM)–Substrate Joints (Mostra >>)
Theoretical study on the bond performance of CFRP-to-steel single-lap shear tests with multiple debonding defects (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2023 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributi su volumi (Capitolo o Saggio)
Effect of cyclic load on the tensile behavior of a PBO FRCM composite (Mostra >>)
Effect of salt crystallization on the bond behavior of glass FRCM-masonry joints (Mostra >>)
Three-point bending tests of concrete notched beams with different sizes and contents of PVA fibers (Mostra >>)
Contributo in Atti di convegno
Behavior of concrete beams reinforced with steel bars or thermoset and thermoplastic resin GFRP bars (Mostra >>)
Bending and shear behavior of historic walls strengthened with composite reinforced mortar (Mostra >>)
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE BOND BEHAVIOR OF CFRP-TO-STEEL JOINTS UNDER FATIGUE LOADING (Mostra >>)
FATIGUE BEHAVIOR OF CFRP-CONCRETE JOINTS UNDER VARYING LOAD FREQUENCY (Mostra >>)
Shear strength contribution provided by inorganic-matrix composites fully wrapped around reinforced concrete beams (Mostra >>)
Tensile behavior of a glass FRCM composite with textile lap splice exposed to freeze-thaw cycles (Mostra >>)
Articoli su riviste
Analytical solution of the full-range behavior of adhesively bonded FRP-steel joints made with toughened adhesives (Mostra >>)
Analytical study of the bond behavior of fiber reinforced cementitious matrix (FRCM)-substrate joints based on a two-stage nonlinear cohesive material law (Mostra >>)
Experimental and numerical analysis of CFRP-concrete joint bond behavior after exposure to wet-dry cycles (Mostra >>)
Experimental and numerical investigation on the tensile behavior of PBO FRCM composites with textile lap splice (Mostra >>)
Influence of severe thermal preconditioning on the bond between carbon FRCM and masonry substrate: Effect of textile pre-impregnation (Mostra >>)
Tensile and compressive behavior of thermoset and thermoplastic GFRP bars (Mostra >>)
Tensile and interlaminar shear behavior of thermoset and thermoplastic GFRP bars exposed to alkaline environment (Mostra >>)
Use of bending test to determine the tensile strength and elastic modulus of GFRP bars (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2022 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributi su volumi (Capitolo o Saggio)
A Cohesive Contact Algorithm to Describe the Multi-axial Bond Behavior of FRCM Composites (Mostra >>)
A Comparative Study of Bond Test Methods for Externally Bonded FRCM and SRG Composites (Mostra >>)
A Discussion of Differences Between Single-Lap Tests and Full-Scale Beam Tests in Terms of FRCM-Concrete Debonding (Mostra >>)
Adhesively Bonded FRP Composites for Strengthening of RC Structures: Recent Advances (Mostra >>)
Calibration of a Rigid-Trilinear Cohesive Material Law to Describe the Matrix-Fiber Bond Behavior in FRCM Composites (Mostra >>)
Design of FRCM Strengthened Masonry Walls Subjected to Out-of-Plane Loading According to CNR-DT 215: Discussion of the α Coefficient (Mostra >>)
Determination of the Matrix-Fiber Cohesive Material Law of FRCM-Concrete Joints (Mostra >>)
Durability of a Glass Fabric-Reinforced Cementitious Matrix Composite under Different Environmental Conditions (Mostra >>)
Estimation of the Shear Strength of RC Members with Externally Bonded, Fully-Wrapped FRCM Composites (Mostra >>)
Experimental Investigation on the Mechanical and Bond Properties of GFRP Anchors Adopted in FRCM-Masonry Strengthening (Mostra >>)
Fatigue Behavior of FRCM Strengthened RC Beams: State of the Art and Future Developments (Mostra >>)
Numerical Study of the Effective Lap-Splice Length of FRCM Composites (Mostra >>)
Relationship between Results of Tensile Test of FRCM Composites and the Fiber-Matrix Bond Properties (Mostra >>)
Stress transferred at the main shear crack of reinforced concrete beams strengthened with U-wrapped inorganic-matrix composites (Mostra >>)
Tensile Tests of FRCM Coupons: The Influence of the Fiber-Matrix Bond Properties (Mostra >>)
Articoli su riviste
A new predictive model for FRCM-confined columns: A reflection on the composite behavior at peak stress (Mostra >>)
Effect of bonded length on the load response and failure mode of pull-out tests of GFRP bars embedded in concrete (Mostra >>)
Fatigue tensile testing of glass fiber-reinforced polymer reinforcing bars (Mostra >>)
Fracture Behavior and Digital Image Analysis of GFRP Reinforced Concrete Notched Beams (Mostra >>)
Long-Term Behavior of PBO FRCM and Comparison with Other Inorganic-Matrix Composites (Mostra >>)
Modeling the behavior of externally bonded reinforcement using a rigid-trilinear cohesive material law (Mostra >>)
Tensile Testing of FRCM Coupons for Material Characterization: Discussion of Critical Aspects (Mostra >>)


Elenco delle pubblicazioni e dei prodotti della ricerca per l'anno 2021 (Mostra tutto | Nascondi tutto)
Tipologia Titolo Pubblicazione/Prodotto
Contributi su volumi (Capitolo o Saggio)
Influence of the test set-up on the bond behavior of FRCM composites (Mostra >>)
Articoli su riviste
A method to calculate the support length of beams resting on masonry walls (Mostra >>)
A proposal to improve the effectiveness of the deflection control method provided by eurocodes for concrete, timber, and composite slabs (Mostra >>)
Characterization and Design of Multilayer PBO FRCM Composite Reinforcements for Concrete Structures (Mostra >>)
Effect of wet-dry cycles on the bond behavior of fiber-reinforced inorganic-matrix systems bonded to masonry substrates (Mostra >>)
Experimental and analytical investigation of PBO FRCM-concrete bond behavior using direct and indirect shear test set-ups (Mostra >>)
Influence of different set-up parameters on the bond behavior of FRCM composites (Mostra >>)
Investigation of the bond behavior of the fiber reinforced composite-concrete interface using the finite difference method (FDM) (Mostra >>)
Low-and high-cycle fatigue behavior of FRCM composites (Mostra >>)
Masonry columns confined with fabric reinforced cementitious matrix (FRCM) systems: A round robin test (Mostra >>)
Review on the bond behavior and durability of FRP bars to concrete (Mostra >>)
Study of the Bond Capacity of FRCM- and SRG-Masonry Joints (Mostra >>)
manifesti v. 3.9.3 / 3.9.3
Area Servizi ICT
24/04/2025